HPE Insight Management Agents are a collection of SNMP-based software applications and tools that monitor the hardware health of legacy HPE ProLiant servers. They collect vital component statistics (such as fans, power supplies, temperatures, and storage arrays) and pass that information to monitoring consoles like the HPE System Management Homepage (SMH) or HPE Systems Insight Manager (SIM).
Note: For modern ProLiant hardware (Gen10 and newer), HPE has largely transitioned to an “Agentless Management” architecture handled directly through the Integrated Lights-Out (iLO) firmware, using the Agentless Management Service (AMS) rather than legacy operating system-level agents. 1. Prerequisites and Installation
Before configuring the agents, you must satisfy operating system dependencies and install the software bundle.
Install CHIF Driver: Ensure the HP ProLiant Advanced System Management Controller Driver (IPMI/iLO interface driver) is loaded in your Operating System. The agents cannot query the baseboard hardware without it.
Install SNMP Service: Ensure your OS native Simple Network Management Protocol (SNMP) service feature is fully installed and enabled before installing the agents.
Download Software Bundle: Obtain the version-matched installer package (e.g., HPE Insight Management Agents for Windows Server or the Linux hpasm package) directly via the HPE Support Center. Alternatively, apply them en masse using the Service Pack for ProLiant (SPP) bundle via HPE Smart Update Manager (SUM).
Run Installer: Execute the application installer (e.g., cpXXXXXX.exe or rpm) and complete the installation wizard. A system reboot is typically required post-installation to initialize driver hooks. 2. Configuration Steps
Configuration relies primarily on the host operating system’s native SNMP configuration and the integrated management utilities. Configure the SNMP Service Hooks Solved: HP insight Management Agent – HPE Community